• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 65 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS544C25: PSpice very slow

Moritz
Prodigy 120 points
Part Number: TPS544C25

Tool/software:

Dear TI Forum,

I tried to use Pspice for TI to design a switching PSU with the TPS544C25 IC.

However, the simulation in PSpice is very slow. Would it be possible to get the unencrypted model to use another Spice?

Kind regards

Moritz

  • 0
    TI__Guru 56925 points

     

    TI does not normally make unencrypted models available, and requires an NDA when unencrypted models are made available, so they can not be shared over the Engineer to Engineer forum.  Please work with your local TI sales representative if you need access to an unencrypted model.