BQ25750: STAT1 and STAT2 logic question

Phil Rittenhouse

Part Number: BQ25750

Tool/software:

Hi,

Could someone clarify what is meant by "ON" and "OFF" with regards to the STAT1 and STAT2 Table 8-6 in the data sheet? Does OFF mean the output is pulled low or does it mean the open drain FET is OFF and thus the output is hi-z?

Best regards,
Phil

3 months ago

+1 Ethan Galloway 3 months ago

TI__Mastermind 30915 points

Hello Phil,

"ON" means the output is pulled LOW. When STAT1 and STAT2 are OFF, the pins should be pulled-up to HIGH by a 10kOhm pull-up resistor.

Best Regards,
Ethan Galloway

+1 Phil Rittenhouse 3 months ago in reply to Ethan Galloway

Prodigy 65 points

Thanks!

Power management

Power management forum

BQ25750: STAT1 and STAT2 logic question