• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 92 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC256403: UCC256403

Pratap K
Prodigy 50 points
Part Number: UCC256403

Tool/software:

Hi,

How do we validate the UCC256403 IC without connecting powerboard.

How we will make sure all the signals what we are giving are correct.

What are the inputs we have to provide to observe the output pulses.

Regards

Pratap

  • 0
    TI__Genius 16155 points

    Hi Pratap,

    You can run this controller in open loop. This controller determines deadtime based on the switch node voltage slew rate.  We do have a simplis model of this controller. You can use the model to validate your power stage.

    Regards

    Manikanta P