LM61495-Q1: LM61495-Q1 Data sheet - too many too wrong which one?

mark ross

Part Number: LM61495-Q1

Tool/software:

Over at digikey...

https://www.digikey.com/en/products/detail/texas-instruments/LM61495QRPHRQ1/14004426

Click on the data sheet and the pinout is 16 pins. Scroll down to the mechanicals and its 22 pins. Their punchlist has the package as 16-VQFN-HR (4.5x3.5).

So can I PLEASE get an accurate up to date data sheet for this part? I have no clue and ZERO confidence as to what this should be.

3 months ago

0 Dino Maslic 3 months ago

TI__Expert 5370 points

Hi Mark,

The most up to date datasheet will be on the device's product page on ti.com. For this device you can see this link:

www.ti.com/.../LM61495-Q1

Thanks,

Dino

0 mark ross 3 months ago in reply to Dino Maslic

Prodigy 50 points

No this is not acceptable. It is very important that you actually read and follow what I am saying. The digikey link lists the component as a 16-Power-VQVFN. The datasheet PINOUT has 16 PINS. Mouser lists the part as a VQFN-HR-16.

So the data sheet link you sent, the pinout is 16 pins, the MECHANICAL part is 22 and NOWHERE is the data sheet does it state that pins 17-22 are no connect. I FIRMLY believe your data sheet is incorrect in one or more aspects.

Is the part 22 pins? Why isn't pins 17-22 called out as N/C? Is the part 16 pins? If so why is the mechanical package data incorrect? Something is wrong.

0 Dino Maslic 3 months ago in reply to mark ross

TI__Expert 5370 points

Hi Mark,

Understand what you are saying now, I see the package drawings at the end of the datasheet are wrong. Talking with my team about this, will get back to you soon.

Thanks,

Dino

0 Dino Maslic 3 months ago in reply to Dino Maslic

TI__Expert 5370 points

Hi Mark,

Datasheet should have correct package drawings now.

Thanks,

Dino

Power management

Power management forum

LM61495-Q1: LM61495-Q1 Data sheet - too many too wrong which one?