BQ27427: how to resolve this issue: the direction of current is error during charge and discharge.

 In the circuit based on the BQ27427 battery fuel gauge，read current through 0x10 register, the value is negative during charge and positive during discharge.

how to resolve this issue。normally, the value is positive during charge and  negative during discharge.  

hi , Adrian

         The designed physical circuit cannot be calibrated by BQStudio tool. under This situation， how to configure the subclassid of the BQ27427 IDs can help correct this issue？ thanks.

hi， Adrian

       how to resolve this issue.

 thanks。

Please check out the last comment in: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1215460/bq27427evm-misbehaving-stateofcharge/

This explains how to change the sign bit on an actual system. The intended flow is to use bqStudio and then export the Golden Image with the Calibration class, which will set the sign bit correctly.