• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 65 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LM25148-Q1: Can you provide the Simplis model setup for this LM25148-Q

LM25148-Q1: The EN Pin input leakage current is not available in the datasheet

Suman Biswas
Prodigy 40 points
Part Number: LM25148-Q1

Tool/software:

Can you provide the EN Pin leakage current of this part

  • 0
    TI__Mastermind 24135 points

    Hi,

    We cannot provide parameter data that is not public information without an active NDA with TI. 

    If you do have an active NDA with TI, please contact your local TI representative to go through the proper channels for this request.

    Thank you,

    Joshua Austria