TPS1HTC100-Q1: Several questions regarding the operation

Hi team,

3. May I kindly know if we prepare the graph of RILM vs ICL?

4. May I also know the typical power consumption of recommended resistor of RILIM?

Best regards,

Shunsuke Yamamoto 

Hi team,

This is just a kind reminder. I am looking forward to your reply.

Best regards,

Shunsuke Yamamoto

Hi team,

This is just a kind reminder.

Best regards,

Shunsuke Yamamoto

Hi Yamamoto-san,

1. I will check on this with the team.

2. The deglitch time is the time it takes for the current limit loop to be recognized from when an overcurrent condition occurs. So, before this time is up, the current can exceed the limit. In cases where the impedance changes really fast like a short circuit, the internal fast trip level, IOVCR, limits how high the current gets. 

Thanks,

Rishika Patel 

Hi Rishika,

Thank you for the reply. I understood your answer 2.

How about my question 3 and 4?

3. May I kindly know if we prepare the graph of RILM vs ICL?

4. May I also know the typical power consumption of recommended resistor of RILIM?

Best regards,

Shunsuke Yamamoto

Hi Yamamoto-san,

Sorry!

3. We do not have this graph.

4. I am also checking on this.

Thanks,

Rishika Patel 

Hi Rishika,

May I know any update on my questions?

Best regards,

Shunsuke Yamamoto

Hi Rishika,

Regarding my question 4, I got the additional information. Could you please confirm and answer it?

4. May I also know the typical power consumption of recommended resistor of RILIM?

->My customer plans to use 24kohm of RILIM. My customer has measured the voltage of ILIM pin, and it is 0.5V. If the maximum voltage of ILIM pin is 0.5V, my customer can use 1005 size resistor since the power consumption of the resistor on ILIM pin is 0.01W. But if the maximum voltage of ILIM pin is 1V, the power consumption of the resistor on ILIM pin is 0.04W, so my customer needs to consider 1608 size resistor. What is the maximum voltage of ILIM pin when RILIM is 24kohm?

Best regards,

Shunsuke Yamamoto