Tool/software:
Dear TI experts,
My customer asked about checking phase margin of TPS78433QWDRBRQ1.
I think I can check it through webench, but TPS784-Q1 do not support WEBENCH.
Do you have another way?
Best regards,
Chase
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dear TI experts,
My customer asked about checking phase margin of TPS78433QWDRBRQ1.
I think I can check it through webench, but TPS784-Q1 do not support WEBENCH.
Do you have another way?
Best regards,
Chase
Dear TI experts,
Please let me know if there is an update about the issue above. Thanks.
Best regards,
Chase
Hey Chase,
I would need to request simulation data. Which could take a few weeks.
Thanks,
Vahnroy
Dear Vahnroy,
Thank you for your support.
Please let me know if there is an update about the issue above.
Best regards,
Chase
Dear Vahnroy,
Please let me know if there is an update about the issue above.
Best regards,
Chase
Dear Vahnroy,
Please let me know if there are any updates about the issue above.
It has been almost a month since I first requested it. My customer is still waiting.
Best regards,
Chase
Hey Chase,
I apologize for the delay here and appreciate your patience. I’ll be sending out some emails internally to check on why this request is taking longer than expected.
In the meantime, could you share a bit more about your end application and the reason phase margin data is needed? For most use cases, stability can be ensured by following the datasheet capacitor and ESR recommendations, but if this request is tied to a compliance, safety, or certification review, that context will help us prioritize the support.
Thanks,
Vahnroy