Tool/software:
Hi,
refering to this thread: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1482849/tps4812-q1-programming-the-short-circuit-protection-threshold-riscp-selection?tisearch=e2e-sitesearch&keymatch=TPS4812-Q1#
I also have the feeling, the used equation is wrong. Yes the calculation sheet gets to the same result when using the example from the datasheet.
But when I use the example values and Equation 29 manually, I get a different value:
Or am I getting something wrong here?
Best regards
Ludwig
