• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 51 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7H4013-SEP: My Part Cannot Be Found In Webench

James Quinn
Prodigy 10 points
Part Number: TPS7H4013-SEP
Other Parts Discussed in Thread: TPS7H4011-SEP,

Tool/software:

No matter what initial design parameters (input voltage, output voltage, and current) I enter for a design, the parts that I am interested in (TPS7H4013-SEP and TPS7H4011-SEP) do not appear as viable selections in Webench online.  Is there a way to force the selection?  Or does the downloadable version allow to start with a specific part?  I want to use specifically these parts for different voltage rails in my application.

Thanks.

  • 0
    TI__Expert 5081 points

    Hi James,

    There are no Webench models for the TPS7H4011-SEP or TPS7H4013-SEP, so they will not appear in Webench.

    For simulation of these devices, please use the TPS7H4011 PSpice model(s) and/or the TPS7H4011 SIMPLIS model.

    Both parts currently use the same model files. To simulate the TPS7H4013, the current limit must be set to the same value as the 4013 current limit, and pins that are not available on the TPS7H4013 should not be used.

    Thanks,

    Andy