• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 74 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS536C7EVM-051: I would like to monitor all 12 phase output voltage waveforms of TPS536C7 in Fusion GUI.

Masaya Tobiyama
Prodigy 10 points
Part Number: TPS536C7EVM-051
Other Parts Discussed in Thread: TPS536C7

Tool/software:

I want to monitor all 12 phase output voltage waveforms of TPS536C7 in Fusion GUI, but when I try to change the Advanced settings in RAIL Configuration, the PASSWORD input screen appears.
Please tell me the PASSWORD.

  • 0
    TI__Expert 5050 points

    Hi Masaya,

    I am not quite sure what you mean by 12 phase output voltage waveforms. On this EVM, there are only two VOUTs (one per rail) so the GUI will only show one VOUT waveform in the monitor tab. 

    Regards,

    Maha