TPS543C20: Lead over threshold

Kaushal C  

Yes, the TPS543C20RVFT is RoHS Exempt under exemption 7a and REACH affected.  These devices use the same packaging technology.

As with your inquiry about the TPS548B22, we need to know your application needs to be able to recommend an alternative solution.

VIN

Vout

Load Current

Also, the TPS548B22 uses TI's D-CAP3 control architecture, which uses frequency stabilized Constant On-time (COT) control, which is a pulse-frequency modulation scheme which can not be synchronized, while the TPS543C20 uses edge synchronized fixed frequency advanced current mode control.

Does your application require one or the other of these control topologies?  I want to make sure we can recommend the best part for your application.

Additionally, in your other thread, you stated that the 5mm x 6mm TPS546B25 was "Too Big" for your application despite being smaller than the TPS548B22 or TPS543C20, which are both 5mm x 7mm.  Is there a maximum size that you can use in your application?

Hi Peter, 

In this case 

VIN- 5V

Vout- 0.7V to 0.8V (based on different application)

Load Current- 37A

Peter James Miller said:

Does your application require one or the other of these control topologies?  I want to make sure we can recommend the best part for your application.

No, not required with these topologies, but we need SENSE feature in the regulator