Other Parts Discussed in Thread: TUSB542, TPS25751
Tool/software:
Hi
Could you help check the below TPS25730 +TUSB542 schematic and any need to adjust
TYPE C needs to have PD function (Power in 30W) and TYPE C also needs USB function.
Thanks
Hi Gareth,
Please see my comments in the attached schematic checklist.
Additionally, the TPS25730 is intended for barrel-jack replacement (i.e. power only) applications. The TPS25730 does not support USB Data (USB communications bit is set to 0 in the Request message) which may cause compatibility issues. I would recommend the TPS25751 for your use-case instead.
Please let me know if you have additional questions/concerns.
Best Regards,
Aya Khedr