TPS65987DDK: Debug Accessory support

Ryuuichi machida

Part Number: TPS65987DDK

Tool/software:

Hi,

I would like to confirm USB PD compliance test content of "Source connect debug accessory".
My configuration of "Debug accessory support" is enabled as shown below.

In this configuration, I created VIF file by using "save project vendor info XML" function of Application Customization Tool. However, I did not find "true" information related to "debug" search.
Here is result of "debug" search
<vif:SOP_P_Debug_Capable value="false"/>
<vif:SOP_PP_Debug_Capable value="false"/>
<vif:Type_C_Is_Debug_Target_SRC value="false"/>
<vif:Type_C_Is_Debug_Target_SNK value="false"/>

As shown above, even though I set "enabled" to "debug accessory support" on configuration file, any related to "debug" variable show "false".
Could you tell me how I can confirm "enable" about "debug accessory support" on VIF file ?

Best Regards,

11 days ago

0 Kevin Kosta 10 days ago

TI__Mastermind 18225 points

Hi,

Thanks for reaching out on E2E!

Give me until the end of the week to take a look this.

Thank you,

Kevin

0 Kevin Kosta 4 days ago

TI__Mastermind 18225 points

Hi,

Regarding debug accessory support for USB compliance your settings are indeed correct. I need to double check with the team but I do not believe we support debug accessory from a compliance standpoint, but you can still utilize it for your own debug which is why the VIF settings are set to false even though the debug accessory support bit is enabled in your PJT file.

Thank you,

Kevin

0 Ryuuichi machida 4 days ago in reply to Kevin Kosta

Guru 12665 points

Hi,

Thank you for your update.
>I need to double check with the team but I do not believe we support debug accessory from a compliance standpoint,
=> Please continue to investigate about above.
Currently, I understood that no matter what setting we configure, we can NOT pass this test.

Best Regards,

0 Kevin Kosta 4 days ago in reply to Ryuuichi machida

TI__Mastermind 18225 points

Hi,

Can you please attach the compliance report along with your PJT file?

Thank you,

Kevin

0 Ryuuichi machida 4 days ago in reply to Kevin Kosta

Guru 12665 points

Hi,

>Can you please attach the compliance report along with your PJT file?
I don't want to share them on public E2E.
Can I send them via private E2E or email ?

Best Regards,

0 Kevin Kosta 3 days ago in reply to Ryuuichi machida

TI__Mastermind 18225 points

Hi,

Feel free to send it over PM!

Thank you,

Kevin

0 Ryuuichi machida 3 days ago in reply to Kevin Kosta

Guru 12665 points

Hi,

Thank you for your reply.
I sent friendship request to you. Please accept it.

Best Regards,

0 Kevin Kosta 2 days ago in reply to Ryuuichi machida

TI__Mastermind 18225 points

Hi,

Just did!

Thank you,

Kevin

Power management

Power management forum

TPS65987DDK: Debug Accessory support