• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 123 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCP010505B: Package specification confirmation

Sky Kao
Intellectual 630 points

Part Number: DCP010505B

Tool/software:

Hi Support Team,

I need to know the following two pieces of information about DCP010505BP-U:

  1. Are Pin 1 and Pin 14 aligned on the X-axis?

  2. What is the dimension marked with the question mark (?) in the diagram below?

  • 0
    TI__Mastermind 33135 points
    Sky Kao said:
    Are Pin 1 and Pin 14 aligned on the X-axis?
    • Yes
    Sky Kao said:
    What is the dimension marked with the question mark (?) in the diagram below?
    • 1.78mm/2=0.89mm and this is the center of the pin to edge of the pin distance. 0.13mm is the edge of the pin to the edge of the package distance. 0.13mm+0.89mm=1.02mm. 1.02mm is the distance from the center of pin 1 to the adjacent edge of the package

    For more detailed information, you can download the model following instructions below:

    1.) Library model, click here

    2.) Click Ultra Librarianto get:

    3.) Click Choose Cad Formats & Download to get below and then choose whatever CAD tool you are using (Altium in example below) to choose and download the model:

    Steve