• State TI Thinks Resolved
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 23 views
  • Users 0 members are here
Support feedback
Options
Options
Related

BQ25713: Request for BQ25713 Allium GUI files for ASU SDSL 3U CubeSat EPS capstone project

Brandon Bennetch
Prodigy 10 points
Part Number: BQ25713

Tool/software:

Dear TI E2E Support Team,

I’m an ASU Electrical Engineering student with SDSL, working on a 3U CubeSat EPS capstone. We need the Allium GUI files for the BQ25713 to configure our 3.7V battery charger. Thank you!

Best regards,
Brandon Bennetch
ASU Capstone Team 13
Email: bbennetc@asu.edu

  • 0
    TI__Mastermind 33525 points

    Hi Brandon,

    If you need the default register settings, they are stored inside the part. During first power on, the charger will load the default settings. You only need to set the charge current to start the operation.

    Regards,

    Tiger