TPS7B69-Q1: AEC-Q100 test show reference failed

Armando Nunez

Part Number: TPS7B69-Q1

Tool/software:

Good day, I have a doubt of why the TPS7B69xx-Q1, references Failed at AEC Q100, with the point Early Life Test failure of EOS and Open circuit, this is a controlled reference or fail during the test? I

1 day ago

0 Nicholas Altman 1 day ago

TI__Intellectual 1190 points

Hey Armando,

Thanks for reaching out! I am contacting our Quality & Reliability Engineer to gather additional information regarding the ELFR failures.

It might take a few days for the QRE to come back with the information. I will respond to this thread once I hear back.

Best Regards,

Nick Altman

0 Nicholas Altman 7 hours ago

TI__Intellectual 1190 points

Hey Armando,

I just emailed you information regarding your question. Lets continue this conversation offline.

Best Regards,

Nick Altman

Power management

Power management forum

TPS7B69-Q1: AEC-Q100 test show reference failed