• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 185 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XDS110ISO-EVM: LP-XDS110ET code composer studio setup

Szabolcs Jakits
Prodigy 110 points

Part Number: XDS110ISO-EVM
Other Parts Discussed in Thread: LP-XDS110ET, ENERGYTRACE

Hi,

I have an LP-XDS110ET board that I would like to use in stand-alone EnergyTrace mode.
I have tried all the settings in Code Composer Studio, but it does not open the EnergyTrace window.
I would like to ask for help on how to get it working. 

Thank you in advance for your help.

Best regards,

Szabolcs

  • 0
    TI__Mastermind 20380 points

    Hello,

    Can you share more details on which TI device you are using?

    Best,
    Matt

  • +1 in reply to Matt Kukucka
    Prodigy 110 points

    Hi,

    Thank you for the quick reply.

    It looks like I managed to find the cause of the problem. It was necessary to install a device package that is supported by EnergyTrace. For example, I previously only had the TM4C MCU package installed, and EnergyTrace would not start even in stand-alone mode. After installing the Wireless package as well, it started working. By the way, it does not make sense that a supported device package is required for stand-alone mode.

    So it’s working now.

    Have a nice day!

    Best regards,

    Szabolcs