USB-PD-CHG-EVM-01: EV2400 Capabilities

TI-CSC

Genius 16265 points

Part Number: USB-PD-CHG-EVM-01
Other Parts Discussed in Thread: EV2400

Hello E2E Experts,

Can the EV2400 be used to program the EEPROM with the *.bin file exported by USBCPD Application Customization Tool Version 1.1.1?
Can the EV2400 be used to extract the current configuration from EEPROM?

Regards,

TICSC

5 months ago

0 Aya Khedr 5 months ago

TI__Mastermind 36012 points

Hi,

Thank you for reaching out!

The EV2400 is an interface board that is designed to be used with BQ (Battery Chargers, Battery Gauges). It cannot be used to program an EEPROM or extract information from an EEPROM.

However, any EEPROM programmer, such as an Aardvark adapter can be used to program an EEPROM during development. See the following thread for more information: USB-PD-CHG-EVM-01: USB-PD-CHG-EVM-01 Programming via Aardvark Adapter Using USB-C PD Application Customization Tool

Best Regards,

Aya Khedr

Power management

Power management forum

USB-PD-CHG-EVM-01: EV2400 Capabilities