BSDL file for UCD9248 device

Robert Chabo

Prodigy 20 points

Other Parts Discussed in Thread: UCD9248

I need the BSDL files for the UCD9248 device. Is it possible to downloade it from the website?

over 13 years ago

0 Brad over 13 years ago

TI__Genius 13700 points

The same BSDL file is common to all the UCD92xx controllers.

It can be found under the file structure for the Fusion Digital Power Designer software, if you have loaded it previously to your computer.

C:\Program Files\Texas Instruments Fusion Digital Power Designer\misc\ucd30xx.bdsl

(this is the default storage location, if an alternate location was chosen then use that file path)

There is some additional information in the following post

http://e2e.ti.com/support/power_management/digital_power/f/184/t/61500.aspx

0 Robert Chabo over 13 years ago in reply to Brad

Prodigy 20 points

The BSDL file is for device programming only and not for board test applications beacuse the pin connectivity information is not sufficient in this file. I need to have BSDL file with complete information for pin connectivity.

0 Brad over 13 years ago in reply to Robert Chabo

TI__Genius 13700 points

Please reference the previously provided link:

From the first response:

"The UCD92xx devices support JTAG to gain access to the ARM processor memory. The JTAG interface does not support boundary scan."

Power management

Power management forum

BSDL file for UCD9248 device