usb-to-gpio firmware update crash

stephane freund

Prodigy 210 points

Hi All,

I already update several time my interface with the usb-to-gpio firmware loader,

but this time during the update I receive an error message eeprom error.

Now I cannot access anymore to the adapter, green LED is OFF and it is not reconized.

How can I recover ?

Best regards

Stephane

over 13 years ago

0 ThomasCosby over 13 years ago

TI__Guru 73830 points

Stephane,

There are several firmware loads for the adapter. Can you tell us which one you were using, so that we can direct your request to the proper group? As far a being able to recover, you probably will not be able to program the adapter once it is in that state.

Regards

Tom

0 stephane freund over 13 years ago in reply to ThomasCosby

Prodigy 210 points

Hi Tom,

I wanted to go from "usb_dpw_v1.0.10.bin" -> "usb_bms_v2.0.19.bin"

Regards

Stephane

0 ThomasCosby over 13 years ago in reply to stephane freund

TI__Guru 73830 points

Stephane,

I can help you. Please update your profile to add contact information and I will send you a new one.

Tom

Power management

Power management forum

usb-to-gpio firmware update crash