• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 63 subscribers
  • Views 379 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About Small Coil for BQTESLA150LP

Sang Won Yoon
Prodigy 25 points

I'm trying to make a small coil (15~20 X 35 mm, Square shape) with using BQTESLA150LP.

In according to manual, freqeucy (fs) is 110~200 (145 KHz) as fixed.

then, How about fd? (in TI 2001 BMS Deep Dive Day 2)

Could I get the design flow (papers or sheets) of coil?

Actually, I'm just started. plz help me.

  • 0
    TI__Guru* 75906 points

    We have information on prototype coils that I can share with you.

    But would like to get additional information on your application.

    We can communicate privately though the conversation feature of the forum.

    Bill

  • 0 in reply to Bill Johns
    Prodigy 25 points

    Thank you for your relpy. Bill John.

    That's awesome, you have information on prototype coils.

    About my application is small coil for implant device (Goal : Under 35 X 20 mm - Square spiral coil)

    So, I was wondering if you mind letting me have 'design flow about coil'?

    (I'm also trying to search 'design of coil' on the internet, specially IEEE.)

    Thanks again. Take care.

    Sang won with gratitude.