Gerber files for the reference design in the BQ500110EVM

Robert2787

Other Parts Discussed in Thread: BQ500110, BQ500210, BQ500110EVM-688

Hi,

We bought an evaluation kit for the BQ500110EVM, and we are trying to find the gerber files without succes. The link that we were used to refer to these files was the following:

http://www.ti.com/tool/bq500110evm-688

this web page does not work anymore. Could we please have the link to get the gerber files and all related data.

Thanks

over 13 years ago

0 Bill Johns over 13 years ago

TI__Guru* 75656 points

The bq500110 has been replaced by the bq500210 device.

EVM for bq500110 has been removed from the web and stock.

I can send you gerber files but if you are looking at a design you should switch to bq5000210.

Bill

0 Robert2787 over 13 years ago in reply to Bill Johns

Intellectual 580 points

We definitively need the gerber files for the bq500110 since we will start a production based on the 500110 chip. It is important for us to keep all the data related to the refrence design.

We would appreciate that you provide us with the files required.

Thanks for your support

0 Bill Johns over 13 years ago in reply to Robert2787

TI__Guru* 75656 points

2045.HPA688A_Gerbers.zip

Gerber files for bq500110EVM-688A attached.

Bill

0 Roger Hebert over 13 years ago in reply to Bill Johns

Prodigy 10 points

Hi Bill,

My name is Roger and i work with Robert on the same project and on the gerber files for bq500110EVM-688A you sent to him they miss some files. The paste file (for stensil), the X and Y file and PCB database in ASCII format. Can you help us for that?

Thank you for your help.

Roger Hebert