BQ27410-G1 10-bit Addressing

Scott Tridle

Does this fuel gauge support 10-bit addressing? The TRM does not state that it does explicitly. We are having some difficulty communicating with this device and would like to make sure this is not the reason. Thanks in advance for your help!

over 13 years ago

0 dMax over 13 years ago

TI__Genius 14985 points

Do you mean that you are trying to use a 10-bit address to talk to the gauge or that you wonder whether the 10-bit addressing of other devices is messing up the bq27410?

0 Scott Tridle over 13 years ago in reply to dMax

Prodigy 50 points

I am using a 10 bit address to talk to the gauge.

0 Scott Tridle over 13 years ago in reply to Scott Tridle

Prodigy 50 points

I should restate my last post. I am trying to use 10 bit addressing to talk to the gauge. Is this possible, or can the gauge only communicate via 7 bit addressing?

0 dMax over 13 years ago in reply to Scott Tridle

TI__Genius 14985 points

All of our single-cell gauges, including the bq27410, only support 7-bit addressing.

Power management

Power management forum

BQ27410-G1 10-bit Addressing