Are the actual design files (layout and schematic capture) available for the bq34z100EVM

Prestor Saillant

Other Parts Discussed in Thread: BQ34Z100EVM

Are the actual design files (layout and schematic capture) available for the bq34z100EVM. If so could you please email them to me at prestor@baycomp.com. We are designing an LEV battery pack and would like to incorporate this part.

over 13 years ago

0 ThomasCosby over 13 years ago

TI__Guru 73830 points

Prestor,

The EVM was designed in PADS. Will these design files work for you?

Tom

0 Prestor Saillant over 13 years ago in reply to ThomasCosby

Intellectual 315 points

PADS would be great, we use it for layout. We also use DxDesigner for schematic capture. Both of these are Mentor Graphics tools.

Thank you for looking into this.

0 Prestor Saillant over 13 years ago in reply to Prestor Saillant

Intellectual 315 points

Hello Tom,

Just checking to see if you were going to follow up on this.

Prestor

0 ThomasCosby over 13 years ago in reply to Prestor Saillant

TI__Guru 73830 points

Prestor,

Here is the PADS database.

Regards
Tom

bq34z100.zip

0 Prestor Saillant over 13 years ago in reply to ThomasCosby

Intellectual 315 points

Thank you. This will be helpful in getting our design implemented quickly.

Power management

Power management forum

Are the actual design files (layout and schematic capture) available for the bq34z100EVM