Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 63 subscribers
  • Views 184 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

output of UCD9222+UCD7242 not stable

guoping Lee
Expert 1010 points

Hi everyone ,I want to output the 1.0V and 0.5V .but the output is not stable,any advise will be nice.there are my PCB figure and FUsion monitor figure.