• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 61 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3429 design not putting out the current it's supposed to...

bowerymarc
Expert 1935 points


I built up an LED driver based on a WebBench design and it's only outputting about 1.5mA of current, rather than the 350mA designed.  I've double checked component values... any ideas why this might happen?

8233.WEBENCH® Design Report.pdf