Simple BQ51050BRHLR Circuit

The circuit show on slide 17 is a small form factor receiver based on the bq51013, 5V output (PR1041).  But a version of this circuit base on the 050 device is not available.

So there is no circuit available based on the BQ51050?

Hi Patrick,

please contact by email regarding this question. I will froward the BOM and the schematic that supports 50B.

Tahar

Hi, My email adress is mail#himynameispat.de. Thank you in advance!

Patrick

Dear Tahar,

it's possible to get the BOM and the scematic of this PR1041. We are developping also a new qi receiver and we would like to use the BQ51013A.

My mail rn#nitz.it

Thx

Ruediger

Pat and Ruediger,

 Please contact the local TI office to assist you on getting the requested info.

 Thanks

Tahar

Hi,

thats what I did before, but all the could provide me were the things I already found on the net. With those items I have, its not even possible to design a circuit due to the lack of a Footprint / Pin Mapping !

Sorry, I attached the file to this Post, it would be nice if someone could provide any sheets to develop a suitable circuit.

Patrick

Dear Tahar,

i did it but tey said to me to contact a distributor. The distributor doesnt have this document.

What should we do? Maybe go to IDT ?

Hi,

Here is the document

http://www.ti.com/tool/bq51050bevm-764

Tahar

So, as far as I can see, there is no (!) Pin mapping available. In this case its not even possible to design a circuit with this chip, is this correct?

Pat,

 Pls let’s take this off-line and close this issue.

 -Tahar

Hi Tahar,

   We are having a difficult time of getting the pin out of the bq51050B  QFN package.   Is this something you can provide?
   We've come up empty via the internet and through distribution and are approaching a 2 week delay.

Thanks!
Chris