BQ78PL114 and EV2300 software

The bq78PL114 uses the bqWizard software as the user interface.  That is available on the device's product page.

The bqWizard requires that you use TI's USB-TO-GPIO adapter.

Thanks. The software is fine, but the adapter is a problem. The local TI agents state that it is not for sale yet. Any suggestions?

I will have a U2G dongle shipped to you. 

http://focus.ti.com/docs/toolsw/folders/print/usb-to-gpio.html

I tried to start a side converstaion you to get your shipping information.  do you have conversations turned on?

go to BatteryBorne profile

In the profile there should be a start a conversation link

or

from your profile, click on “edit profile” and go to “site options” then scroll down to “conversations” then select “all member”  

Hi, thanks for all you assistance, much appreciated.

I turned on the conversations, eventually. I could only get around it today.

I have also been in contact with Adrian Grindon from the UK. He supplied me with the BQ78PL114 samples and he has kindly agreed to send me a USB-TO-GPIO module. I expect it to arrive early next week. I thought it might be easier dealing with him as they are clsoer to our time zone.

Thanks gain, your assistance is greatly appreciated. I must say that I have been very impressed with TI's support after battling for a while via the local supplier. Regards,