"I installed the gas gauge software and had a question about one of the button functions. The SBS screen has a "Write 2 word command" button. Do you have any info on the commands and data format? I'm learning the SM Bus and that would be helpful."
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
"I installed the gas gauge software and had a question about one of the button functions. The SBS screen has a "Write 2 word command" button. Do you have any info on the commands and data format? I'm learning the SM Bus and that would be helpful."
Two-word command are actually two-word keys that used with Manufacturer Access command 0x00.
Read the Permanent Fail Clear, Full Access Device, or Unseal Device entries in the "Standard SBS Commands section", found in the Technical Reference of bq20z75 (sluu265a). http://focus.ti.com/docs/prod/folders/print/bq20z75-v160.html#applicationnotes