STILL TIME TO REGISTER - - - Customer Deep Dive Battery Management Training
Time: October 27th, 28th, and 29th, 2008
CONF 3, CONF 4, and FL03 South Campus
12500 TI Blvd
Dallas, TX 75243
Contact persons:
Logistics: Cindy Mahana; 214-567-4242 (office) and 214-882-4815 (cell); cmahana@ti.com
Technical information: Jinrong Qian; 214-567-5622, jqian@ti.com
Expense: No charge, but customers are responsible for their travel expense.
Recommended Hotel: http://www.cpdallas.com/
Crown Plaza
7800 ALPHA ROAD
DALLAS, TX 75240
Tel: 1-972-233-7600
Rate: $97 (Including full American breakfast, high speed internet, and parking), Code: TIC
Cut-off date with TI rate: October 12, 2008
1. Direct to Crowne Plaza Suites – 972-233-7600 option 2, please reference group code “TIC”.
2. Crowne Plaza Reservations Worldwide - 1-800-227-6963, Please refer to Crowne Plaza Suites Dallas Park Central at 7800 Alpha Road. Also use the group booking code “TIC”.
3. Hotel Website – www.cpdallas.com <http://www.cpdallas.com/> , Click on “Reservations” and enter their arrival and departure information. Then click on the “Corporate/Group” field. Under Group Code enter “TIC” and click “Check Availability”.
Airport: Dallas/Fort Worth International airport (DFW)
Brief Schedule:
October 26th: Arrival
October 27th: Single cell and multi-cell Fuel gauge
October 28th: Single cell and multi-cell fuel gauge
October 29th: Battery chargers and 1:1 customer vs Apps/Systems/product line discussion
Detail Training schedule:
October 27: CONF 3, CONF 4, and FL03
9:00am to 9:30am: Introduction and welcome
9:30am to 10:30am: Topic 1: Impedance track gas gauge theory
10:30am to 10:45am: Break
10:45am to 11:05am: Topic 2: Documentations: Tech manual, apps book, app notes, FAQ….
11:05am to 11:30am: Topic 3: Battery chemistry selection
11:30am to 12:00pm: Topic 4: bqEASY features and functions presentation
12:00pm to 1:00pm: Lunch and new product update from Notebook Solutions
Track A (CONF 3/4): 2-4 Cells Impedance Track Fuel Gauge bq20z7x/z9x
1:00pm to 1:30pm: Topic 5: bq20z70/z80/z75/z90/z95 and z40/45/60/65
1:30pm to 2:30pm: Topic 6: How to set up data flash constants for bq20z7x/z9x/z4x/z6x
2:30pm to 2:45pm: Break
2:45pm to 3:15pm: advanced CEDV 2-4 cell fuel gauge bq3060
3:15pm to 5:30pm: Lab A: bqEASY and bq20z90-bq29330 validation (Two persons as a team).
Track B (FL03): Single Cell Fuel Gauge
1:00pm to 2:00pm: Topic 7: Li-Ion Battery chemistry fundamentals
2:00pm to 2:45pm: Single cell impedance track operation principle
2:45pm to 3:00pm: break
3:00pm to 3:30pm: How to set up data flash constants for bq27500
3:30pm to 4:00pm: Learning cycle to make optimized parameters for bq27500
4:00pm to 4:30pm: Impedance track gas gauge calibration
4:30pm to 5:00pm: Battery pack mass production flow chart
5:00pm to 5:30pm: Field data-flash update
6:30pm: Group Dinner
October 28, Track A (CONF 3): 2-4 Cells Impedance Track Fuel Gauge bq20z7x/z9x
9:00am to 9:30am: Topic 9: learning cycle to make optimized parameters
9:30am to 10:00am: Topic 10: Impedance track gas gauge calibration
10:00am to 10:15am: Break
10:15am to 10:55am: Topic 11: bq20zXX circuit design consideration, layout, and ESD
10:50am to 11:25pm: Topic 12: Battery pack mass production flow chart
11:25am to 12:00am: Topic 13: 5-10 Cells Protector bq77PL900.
12:00pm to 1:00pm: Lunch and Single Cell new Product update
1:00pm to 2:00pm: Topic 14: 4-8 cell fuel gauge with Power Pump cell balance technique bq76PL114-PL102
2:00pm to 4:00pm Lab C: bqMtester for bq20zxx
4:00pm to 5:30pm: QA 1:1 customer project discussion
Track B (CONF 4): Single Cell Fuel Gauge
9:00am to 9:30am: Topic 15: Single cell IT fuel gauge accuracy test and results
9:30am to 12:00pm: Lab B: bqEASY and bq27500 validation (Two persons as a team).
12:00pm to 1:00pm: Lunch and new product update from Handheld Solutions
1:00pm to 1:30pm: bq27500 circuit design considerations, ESD and layout
1:30am to 2:00pm: Single cell Impedance track pack-side fuel gauge bq27540
2:10: 2:30pm: bq27501 RID selection and system design
2:30pm-5:00pm: QA and 1:1 customer project discussion
October 29, 2008
Track A: FL01: Battery Charging
9:00am to 10:00am: 2-4 Cell Li-Ion synchronous switching battery chargers.
10:00am to 10:30am: Input current based dynamic power path management battery charger
10:30am to 10:45am: Break
10:45am to 11:15am: USB switching charger
11:15am to 12pm: New product update from battery charge management
12:00-1:00pm: Lunch
Track B: 1:1 customer vs TI engineer project discussions (Please inform TIers as early as possible)
AFA and customer Pre-requisite:
1. 2-4 cell Impedance Track fuel gauge Applications book: SLUA404: https://focus.ti.com/seclit/an/slua404/slua404.pdf
2. Single cell impedance track fuel gauge applications book: http://focus.ti.com/lit/an/slua458/slua458.pdf