• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 190 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ76925 EEPROM

Jacob Talley
Prodigy 10 points
Other Parts Discussed in Thread: BQ76925

I'm using a BQ76925 for power management/monitoring. Everything seems to be working fine except that when attempting to access EEPROM addresses, the chip responds only occasionally, and then only with a value of 209. I'm not doing anything differently to access EEPROM addresses than any other address.

  • 0
    TI__Guru 54715 points

    The EEPROM should read like any other register. The address changes obviously.  It may be helpful to verify the address on the bus with a scope.  If you have other boards or parts, check to see if the result is different.