This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR10510/LMR10515 Enable Pin

Other Parts Discussed in Thread: LMR10510

Hi Team,


Customer wanting to enable LMR10510/10515 with output of 1.8V LDO, but is concerned about zero margin in the design.  In the datasheet there are no diagrams regarding the dependancy of this signal to any other parameters (ie. VIN, temperature, rise/fall times of enable input signal, etc..). Cust considering adding a capacitor to delay the enable if neccesary. Any insight on this?



Adam Hoover