GERBER FOR PMP4332 USING UCC24610, 25600 & 28051

Neelesh Karun

Intellectual 510 points

Dear Sir,

Requuest you to provide gerber. this is required for a led project.

thanks and regards

over 12 years ago

0 Lisa Dinwoodie over 12 years ago

TI__Genius 15910 points

I had to send a request to the person that creatd this design as there aren't any Gerber files in the project folder. I will post them as soon as he makes them available.

0 Lisa Dinwoodie over 12 years ago in reply to Lisa Dinwoodie

TI__Genius 15910 points

Here are the Gerbers for PMP4332

PMP4332 Gerber.zip

0 Neelesh Karun over 12 years ago in reply to Lisa Dinwoodie

Intellectual 510 points

Dear all

thank you for the same and also could you help with the transformer winding details, since we ourself wind our transformers.

Thanks once again

0 Lisa Dinwoodie over 12 years ago in reply to Neelesh Karun

TI__Genius 15910 points

This request has been submitted to the designer and will be answered as soon as the information becomes available

0 Neelesh Karun over 12 years ago in reply to Lisa Dinwoodie

Intellectual 510 points

Dear Lisa,

Thank you

0 Lisa Dinwoodie over 12 years ago in reply to Neelesh Karun

TI__Genius 15910 points

I am still waiting for a reply from the PMP4332 designer and have resubmitted the request. Can you tell me who the customer is and at what stage the design is at?

0 Neelesh Karun over 12 years ago in reply to Lisa Dinwoodie

Intellectual 510 points

Dear Lisa,

already processed the boards and expected by monday, this power supply is for stadium display boards already using meanwell power supplies getting now replaced with the one's supported by us. this power supply will eradicate 4 power supplies and probably reduce on the failure of supplies.

thanks and regrads

0 Lisa Dinwoodie over 12 years ago in reply to Neelesh Karun

TI__Genius 15910 points

The transformer is built by a local vendor, they do not provide the datasheet, but I can give you the transformer parameters in PMP4332.

Core: PQ3220

Inductance: 200uH

Turns ratio:20:1

Primary winding: 10 AWG32 parallel 20turns

Secondary winding:0.4mm*8.5mm copper strip 1 turn.

0 Neelesh Karun over 12 years ago in reply to Lisa Dinwoodie

Intellectual 510 points

Dear Lisa,

thank you this will do and also if you could support for the following

T-3 EE19H_4332,2.3mH and

T1-2 PQ3220 Transformer, 95uH inductance

1 L2 90uH PQ3220 Indcuctor

Thanks and regards

Power management

Power management forum

GERBER FOR PMP4332 USING UCC24610, 25600 & 28051