• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 421 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Ripple in Boost design using Current mode Boost Controller

Bala CJ
Prodigy 10 points

I did a design for 9VDC input and 32V/2A Output using TPS 40210. I want to know how much will be the voltage ripple at the output before implementing the design. Any tool to calculate?