I am considering using the UC3823 PWM controller but I noticed that there is a UC3823A version also available. I would consider using the A version except that I will be driving SiC FETs so I need 20 volts of drive plus another 3 volts for turn off bias. The A version is limited to 22 volts as opposed to the non A version which can stand 30 volts which makes the A version unsuitable for driving SiC FETs. My question is will the non A version become obsolete in favor of the A version part?
-
Ask a related question
What is a related question?A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.