Currently we are designing the Power supply section one of the Board, My requirement is 12V input, 1.2V output, 120Amps current required.
One the Chip is utilizing up to 2A, these kind chips have around 40 in the Board and Chip associated components, so our chips only consuming around 80A.
i unable to calculate the Values RIlm1, Rilm2 and Rdroop values as per the datasheet could you please guide me on this.
Please provide Hardware Design Guide for this power supply. Please find below link which we designed
To maintain 120A current, i will use 4Phases to achive 80A. Could you please review the design and please let us know, you have any suggestions.