bq20z75 - Keep scanning on during calibration.....

Kjell Ramberg

Dear all,

I have one question - during calibration is it important that the Keep scanning is unchecked ? What is recommended to be "best practice"

Best regards

Kjell

0 Onyx Ahiakwo over 11 years ago

It is recommended to keep the scanning unchecked.

thanks

Onyx

0 Kjell Ramberg over 11 years ago in reply to Onyx Ahiakwo

Expert 1375 points

Hi Onyx,

Thanks so much for your assistance.

I will add to the internal production procedure "uncheck Keep scanning if checked before calibration".

Appreciate your help

Best regards

Kjell

Power management forum