• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 333 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

bq34z100 HDQ

J.C Chen
Expert 1285 points

Hi, TI Team

   May i program the .senc file via HDQ?

Best Regards

J.C Chen

  • 0
    TI__Guru 73830 points

    JC,

    It should be possible, but our tools do not support it. The process would be very slow. The plan was to handle all communication  with the device over the I2 interface and then switch it over the HDQ mode at the very end.

    Tom