I have aquestion.
Our customer is evaluating LM3434(SNVA431B and DLPA038)
AN-2041 LM3434 20A Evaluation Board (Rev. B) (snva431b.pdf)
http://www.ti.com/litv/pdf/snva431b
DLP Pico Discrete LED driver design guide & LM3434 Application Note (dlpa038.pdf)
http://www.ti.com/litv/pdf/dlpa038
Our customer has both EVM LM3434(SNVA431B and DLPA038) with ignition and a whole.
They used positive powering 12V.
How would be considered the solution.
Best / regards