• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 62 subscribers
  • Views 223 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

bq27425-G2 / Minimum wait time for read-write Extended Command

S.Satoshi
Guru 21685 points

Hi Team,

In the P26 of datasheet, it state that we need to wait minimum 2 seconds for read-write standard command. Is this wait time applied for Extended Command?

 

Copy from P26.

"For read-write standard command, a minimum of 2 seconds is required to get the result updated."

 

Best Regards,

Sonoki / Japan Disty

  • 0
    Guru 21685 points

    Hi BMS Team,

     

    Here is the additional information from our customer.

    They tried to read “Security 112 Codes [RAM]” from Extended Commands of DataBlock( ), then it took about 200us from send command to receive data.

    Please let us know if we need to wait 2sec for read-write Extended Command also.

     

     

    Best Regards,

    Sonoki / Japan Disty

  • 0 in reply to S.Satoshi
    Guru 21685 points

    Hi,

    Can you give your advice for this question? Please let me know if you need more information.

    Best Regards,

    Sonoki