bq24195L / BATFET OCP

S.Satoshi

Hi BMS Team,

Please let me ask about BATFET OCP.

In supplement mode, I understand that the BATFET OCP will work and latch-off the BATFET when the discharge current from battery will be higher than 9A. Then should we unplug and plug VBUS again to reset latch-off?

Best Regards,

Sonoki / Japan Disty

over 11 years ago

0 S.Satoshi over 11 years ago

Guru 21685 points

Hi,

I'm waiting for your response. It's appreciated for your kindly support.

Best Regards,

Sonoki

0 ezhao over 11 years ago

TI__Genius 10240 points

Sonoki-san,

Your understanding is correct. If the BATFET is latched off due to the over current, the only way to turn on the BATFET is the adaptor plug in. Please be advised that the 9A is the minimum spec.

0 S.Satoshi over 11 years ago in reply to ezhao

Guru 21685 points

Hi Eric-san,

Thank you for your response. I understand that we need to plug in the adaptor to reset latch.

Best Regards,

Sonoki

Power management

Power management forum

bq24195L / BATFET OCP