• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 63 subscribers
  • Views 138 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ26100 verification of KEY0 & KEY1 area

Frantisek Zabecky
Expert 2070 points
Other Parts Discussed in Thread: BQ26100

Hello,

Is it possible to read content of areas KEY0 and KEY1 of device BQ26100? Our customer programmed this two areas with our programmer and is trying to verify this with yours "BQ26100 evaluation software". Is it possible to verify the content of this areas? Our programming algorithm program selected area(KEY0 or/and KEY1) and lock corresponding bit of LOCK PAGE register immediately. Future read of LOCK PAGE register says that the LOCKK1 and/or LOCKK0 are set (KEY1 and/or KEY0 are locked) as we expect.

Thanks,

Frantisek