• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 343 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS63061 - Design board layout

ee06091
Intellectual 340 points
Other Parts Discussed in Thread: TPS63061, TPS63060EVM-619

Looking at page 31 of datasheet there is a example of board layout http://www.ti.com/lit/ds/symlink/tps63061.pdf

My question is about the 5 circles below:

Are they just layout design, holes or vias?

Thank you,

José Xavier

  • 0
    TI__Expert 7110 points

    In this example, this would be the Vias, connecting the thermal pad electrically and thermally down to the bottom layer. This example, however, does not show the placement and the routing of the passive components.

    Therefore I recommend to follow the layout of the Evaluation Module.

    Here is the link to the EVM folder: http://www.ti.com/tool/tps63060evm-619


    There are drawings in the User's Guide and appropriate Gerber-files available.