This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About the BQ20Z45 2S 3S application circuit

Other Parts Discussed in Thread: BQEVSW, BQ20Z45

Dear Sirs:

I have a problem, that my PCM is not working, cannot charge and discharge.

Who can help me to find which is wrong for my design? (how to attached?)

or please give me the 2S/3S schematic.

Thanks!

  • Before I can determine what's going on in your situation, I need some clarification on what you're using.

    • Are you using TI's EV2300 or 2400 USB interface and the accompanying bqEVSW software?
    • Are you using a TI bq20z45 gas gauge EVM (evaluation module) or your own circuit board?
    • Do you have screenshots of the SBS data registers from the bqEVSW software?

    To attach a photo, use the "Insert image" button in the editor's menu bar.