• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 301 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Configuring flash constants

Jeremy51164
Intellectual 780 points
Other Parts Discussed in Thread: BQEVSW, BQ20Z80

Hello,

When idscussing the topic of configuring flash constants using bqEVSW, several TI documents (including Data Flash Programming and Calibrating the bq20zxx Family of Gas Guages - SLUA379E, Aug 2013) reference the application report bq20z80 EVM Data Flash Settings for Number of Serial Cells and Pack Capacity - SLVA208.  Is this document, or a replacement for it, still available?  I find the bq Wizard produces some strange results at times and would like to take a look at the SLVA208 if possible.

Note that SLVA208B, Nov 2006 provides a supplement to SLVA208, but does not reproduce the original information.

Thank you,

Jeremy.