• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 720 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BOM for EVAL board LM2577

Zhi Ling Tai
Prodigy 10 points
Other Parts Discussed in Thread: LM2577, LM2585, LM2587

Hi everyone,

I just bought couple of EVAL boards for LM2577. A sample of the board as shown below:

Unfortunately, I do not see any BOM available or the component placement online. Anyone has this information appreciate it if you could share it with me.

  • 0
    TI__Guru 66015 points

    Unfortuenately, this is a very old device and it may be dificult to get this data.

    I will pass this along to our Webencha and EVM group.

    FD

  • 0
    TI__Intellectual 2930 points

    Hi,

    The board you have was designed to be able to prototype many different designs on a single board using either the LM2577,  the LM2585 or LM2587  ICs. Our online design tool WEBENCH can give you a BOM for the LM258x series specific to your design requirements, but not for the LM2577. While in WEBENCH if you click on the Thermal sim page the picture will give you an idea of component placement. If you need more a more detailed description check out the Export feature as well, it will allow you to export the the design to a PCB CAD tool.

    Try this link for LM2585 in WEBENCH:
    http://webench.ti.com/webench5/power/webench5.cgi?VinMin=4.50&VinMax=5.50&O1V=12.00&O1I=0.50&base_pn=LM2585&AppType=None&op_TA=30&lang_chosen=en_US&optfactor=3

    If you want to use the LM2577 I suggest you reference the example BOMs in the datasheet.
    http://www.ti.com/lit/ds/symlink/lm1577.pdf

    Best regards,
    Tommy