Hi,
I have found an error in UCC28950 model in SLUM186 simulation file in TINA; the drive signals C and D are swapped over. I have checked these signals with UCC28950 datasheet.
someone please verify this simulation for me.
Thank you
Siva
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I have found an error in UCC28950 model in SLUM186 simulation file in TINA; the drive signals C and D are swapped over. I have checked these signals with UCC28950 datasheet.
someone please verify this simulation for me.
Thank you
Siva