Hi everyone,
I'm designing a power management with the BQ24230RGTT on Altium designer.
My problem is that the design found on Altium contain an unknow pin called "EP".
Is this pin corresponding to the thermal pad, or External Pad ??? (So must be connected to GND?)
Secondly, there is 2 "OUT" pins and 2 "BAT" pins. I don't know how to manage the second BAT and OUT pins because I only have 1 output and 1 battery to charge.
The only Information I found on the datasheet is on the "pin description" part, and it is not enough understandable to me. Can anyone help me?
Thank you for any help, have a good day.
Hugo B-P
