un-documented BQ3055 flash map parameters

anthony kahl

Other Parts Discussed in Thread: BQ3060

Hi All,

There are a few of these, I'm looking at the january 2012 technical reference as available on the product page. In particular I'm after a description on the 'AFE SC Dsg Cfg 2' value and what it represents.

Thanks

Anthony

over 10 years ago

0 ThomasCosby over 10 years ago

TI__Guru 73830 points

Anthony,

I did not find the AFE SC Dsg Cfg 2 parameter in the bq3060 documentation. The latest revision to the TRM on the web is from October 2013. Anyway, this parameter does not apply to the bq3060.

Tom

0 anthony kahl over 10 years ago in reply to ThomasCosby

Prodigy 165 points

^{Sorry Tom, I had mistakenly referred to the BQ3060 in the subject line, I had meant BQ3055 (we have switched from the 3060 to the 3055 in our pack design).}

Anthony

0 ThomasCosby over 10 years ago in reply to anthony kahl

TI__Guru 73830 points

Anthony

The AFE SC Dsg Cfg 2 register allows you to set a second short circuit threshold. You could set the first one to a threshold and a longer delay time and the second one to a high voltage and a shorter delay time.

Tom

0 anthony kahl over 10 years ago in reply to ThomasCosby

Prodigy 165 points

Thanks Tom

Power management

Power management forum

un-documented BQ3055 flash map parameters